background image

 

   

 

 

 

Each 

Pakhammer

  or component thereof, manufactured by Paratech Incorporated, has been 

thoroughly inspected and properly adjusted before shipment to insure the highest quality and the 
greatest possible reliability. 

Paratech Incorporated (hereinafter referred to as “Seller”) hereby warrants the 

Pakhammer

 or 

component thereof to the original retail buyer only against defects in material and workmanship 
under normal use and service for a period of one year from the date of purchase. This warranty 
shall constitute the sole warranty of the Seller with respect to the 

Pakhammer

 or  component 

thereof. 

THE SELLER HEREBY  DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, 

EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE.

 The Seller neither assumes nor authorizes any 

other person to assume for it any other obligations or liabilities in connection with the sale or use 
of this product. 

Should there be any defects in the material or workmanship of the 

P a k h a m m e r

, buyer should 

return the defective product to the factory for inspection with shipping prepaid within one year from 
the date of purchase. If inspection shows that the 

Pakhammer 

or a component thereof is defective 

and that such defects were not caused by negligence, misuse, accident or unauthorized service, the 
product sold hereunder will be repaired or replaced at the option of the Seller, without charge, FOB 
at the factory, Frankfort, Illinois. 

THIS REMEDY SHALL BE THE  EXCLUSIVE  REMEDY  FOR  BREACH  OF  WARRANTY 

WITH RESPECT TO THE PAKHAMMER  OR COMPONENTS THEREOF. THE SELLER SHALL 
NOT BE  LIABLE FOR  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES  RESULTING  FROM 
ANY  BREACH OF WARRANTY  WITH RESPECT TO THE PAKHAMMER  AND COMPONENTS 
THEREOF FROM ANY DELAY  IN THE PERFORMANCE OF THE REMEDY HEREUNDER. 

 

 

 
 
 
 
 

                

 

Paratech Incorporated 

P.O. Box 1000 

Frankfort, IL 60432 USA 

 

Phone: 815.469.3911 

Fax: 815.469.7748 

www.paratech.com 

E-mail: [email protected]

 

 

 

 
 

7-4 

Содержание 550500G2







































Отзывы: