8
WARNING
To avoid electrical shock not open the back panel of the insert unless the power has
been turned off, and the insert has been unplugged.
WARNING
Any electrical repairs to this electric fireplace, should only be performed by a
qualified technician.
WARNING
Any electrical wiring repairs should only be performed by a qualified electrician, and also
must comply with local building codes.
WARNING
Discontinue use of this electric fireplace if any of the follow has occurred: Water damage,
if insert has been dropped or dented, if power cord has become broken, if power cord
becomes hot to touch, if unit smokes or smells like smoke.
Note:
When the heat function is used for the first time, a slight odor may be present. This is normal
and should not occur again unless heater is not used for extended periods of time and dust is allowed
to accumulate on heater element.
WARNINGS AND CAUTIONS
TROUBLESHOOTING
6. Heater and/or flame turn off
while operating
Timer function may have been on
Push On/Off button to reset
4. Logs glow, but no flame
Flame spinner disconnected
Call customer service for
instructions
5. Flame and logs glow, but no
heat
Heater switch is off
Push heater button. Indicator light
will come on
2. No power, no indicator lights
No power at outlet
Check circuit breaker or fuse
3. Power indicator lights come on,
logs will not glow and no flame
effect
Broken or burned out light bulbs
Follow instructions for replacing
light bulbs
CORRECTIVE ACTION
1. No power, no indicator lights
Insert was not plugged in
Make sure that power cord is
plugged into 120 V outlet
PROBLEM
POSSIBLE CAUSE
