Paramount Fitness BM80, Руководство по установке и эксплуатации

Страница: 7 / 19

Installation
5
Unpacking
Immediately after unpacking mixer, check for possible shipping damage. If this machine is found to
be damaged, save packaging material and contact the carrier within one day of delivery.
Remove all packaging and transit protection including all protective plastic coating from the exterior
stainless steel panels.
Check Mixer and supplied parts for damage. If this machine is found to be damaged after
unpacking, save packaging material and report any damage immediately to carrier and distributor.
Location
Place mixer in its operating location, on a sturdy level surface. There should be adequate space
around mixer for the user to operate the controls and to install and remove the bowl.
Holes are provided in the base to permanently secure the mixer to the floor, although this not
necessary in normal installations.
Floor models must be levelled front to back and from side to side by sliding shims under legs as
required.
Electrical Connection
Electrical connection should be made by a qualified person in accordance with applicable codes and
regulations.
Prior to installation, check that the available electrical supply is correct to as shown on the
Technical Data Plate located on the rear side of the pedestal.
Permissible voltage fluctuation is ± 10% of nominal voltage.
NOTE: Phase rotation direction to follow direction of arrow shown on front of mixer.
Components having adjustments protected (e.g. paint sealed) by the manufacturer, are
only to be adjusted by an authorised service agent.
Lubrication
NOTE: #1 Grade Oil (85W/140) is recommended for
transmission gears. This mixer is already
filled with enough oil when leaving the
factory.
Transmission gears are already filled with enough
#1 Grade Oil (85W/140).
If oil level falls below gauge line, add more oil.
Remove Oil Fill Plug ‘1’ fitted on transmission case
cover and insert tubing, add oil up to fill mark.
Refit and tighten the oil fill plug.
1
2
Important:

Before installing the mixer, check that the available electrical supply matches that of the mixer as
stated on the mixer’s rating plate.
Important:

Installation shall comply with local electrical, health and safety requirements.

It is most important that this mixer is installed correctly and that mixer operation is correct before
use.

If you have any questions regarding the proper installation and / or operation of this appliance,
please contact your local Paramount distributor.