www.paramondo.de
33
Montage •
Installation
Alignment / adjusting the articulated brackets / operation
Check whether the front profile is level.
To adjust, loosen the locknuts (do not
unscrew them completely). Next, you
can align the marquee by turning the
adjusting screws and setting the tilt.
To adjust the settings, you can lift the
articulated brackets slightly. This allows
you to turn the adjusting screws more
easily.
Once you have finished making all
settings, tighten the locknuts again!
Hook the marquee crank into the crank
shaft loop on the gears and make sure
it works effortlessly without any
problems.
The marquee cloth must be wound
onto the shaft from above (see
figures); rolling it the other way can
cause damage to the cloth and the
articulated brackets.
When the front profile touches the
shaft, try not to continue turning,
as this can cause damage to the cloth,
the front profile and the articulated
brackets.
Make sure the marquee cloth does
not sag. The cloth must always be
tensioned by the articulated brackets.
The articulated brackets must not be
extended completely, as otherwise the
cloth will sag and the brackets could be
damaged when cranking in the cloth.
Sicherungsmuttern
Arm
Tragrohr
Einstellschraube
Cloth
Cloth
Front profile
Cloth
Cloth
Locknuts
Adjusting screw
Bracket
Supporting
tube
