www.parametric.ch/product/pcr2-ods
Settings
Overview of Application Settings
Operation Mode
Timespan
– count objects and send sum after
interval.
NotZero
– Same as Timespan but does not
send if counters are 0 (zero).
Trigger
– Send on every detection. Use Hold
Off Time to prevent sending on every event.
CapacityAltert
– Set limit on how many people
may enter a shop.
Trigger Hold Off [s]
Time to re-arm trigger.
0…600s (0 = no suppression).
Uplink Interval [min]
Set the sending interval in minutes (1…1440
minutes). During this time, all persons will be
counted and sums are transferred. After
transfer, counters will be reset.
Overview of LoRaWAN Settings
Confirmed Uplinks
Send uplinks with ACK requests.
LinkCheck Interval
After this interval, send LinkCheckReq with next
uplink. Set to zero to disable Linkcheck
completely.
DevEUI, AppEUI, AppKey
Enter your LoRaWAN Keys
Payload Type
Choose between Parametric and Cayenne LPP
compatible payload formats.
Overview of Radar Settings
Autotune
If enabled, the sensor will measure up to 20
objects passing by. Then the radar sensitivity
will be set automatically.
Radar Sensitivity [%]
You can set the radar module from 10% (fairly
sensitive) to 100% (very sensitive).
