www.parametric.ch/product/pcr2-ods
Open PPX Setup Tool
Open the free Parametric Product
Explorer (PPX) Tool by opening the
following
URL:
https://ppx.parametric.ch/connect
In order to configure your device you
need to connect it to your PC’s USB
port.
•
Find
connector
named
CONFIG on your device
•
Plug in an USB-Cable on both
sides (PC and device)
•
Pess “Open Selector” button
when ready to select port
Overview PPX Configurator Tool
Start the PPX Configurator tool.
After some seconds you will see the
device information and settings.
Device information includes:
sensor
type,
serial
number,
firmware, shipping date, hardware,
and warranty days left.
Clicking the “Information” icon (1)
leads to the device’s product
catalogue page where you can find
the device documentation.
Clicking the three dots (2) sets the
default settings.
Extended Warranty Available leads
you to the Parametric Store to
upgrade your device’s warranty.
Re-Power the device to start the Join
procedure.
After
a
successful
connection the sensor LED will stop
blinking.
Always press ‘Save’ after changing settings.