PAGE 2
OPERATION MANUAL V1.0
HC2
Parts and Functions
1. Charging slot A
2. Charging slot B
3. Charging indicator A
4. Charging indicator B
5. Power sharing indicator (LEFT unit)
6. Power sharing indicator (RIGHT unit)
7. Power sharing mortise
8. DC input
9. Power sharing extension
1. Connect the adaptor to a wall outlet.
2. Select NiMH on handheld or beltpack transmitter.
(See relevant transmitter instruction manual ‘Battery Type Setting’ section)
3. Insert the transmitter onto the charger.
4. Indicator LED:
SOLID RED:
during charging.
SOLID GREEN:
fully charged.
Charging process takes about 5 hours. (Using battery 1.2V 2100mAH. Transmitter refers to indicator.)
5. The power sharing allows series connection for simultaneous charging of max 6 transmitters. Both chargers’ power
status can be read by individual indicator
3
or
4
on the master unit, which turns on if connected. Connect up to 3
chargers to one power supply.
6. This charger adopts intelligent compensation charging/control circuit for output-short prevention and user-friendly
operation.
Operation
Note
If the red LED doesn’t light up or keeps flashing during the charging process, it indicates the charging contacts error, the
battery quality is poor, or has an output short. Please reposition the transmitter or replace the batteries with new ones
and ensure the correct connection between the charger and transmitter and then restart the charging process.
Содержание HC2
Страница 1: ......
