Copyright © Parallax Inc.
Penguin Robot (#27313-27316)
v1.4 2/16/2010 Page 16 of 23
Step 15: Install batteries and tidy servo wires
Install (2) CR123 batteries into the Penguin’s power pack. The batteries will be oriented in the same
direction; refer to the pictorial molded into the bottom of the battery holder’s plastic surface. Coil up the
servo wires behind the robot. It’s also possible to hide them in the Penguin’s body, but that requires
substantial attention to detail considering the lack of free space.
Step 16: Penguin is finished
Congratulations. Your Penguin is complete and ready for programming!
Содержание Penguin
Страница 24: ......
