8
9
Rotate the selector ring to power mode position and hold the
activation switch for 4 seconds to turn on the camera. The
display will show the Paralenz logo and the camera will vibrate.
When the camera is ready to use, the display will show the Home
screen. This screen will show battery level, SD card storage level,
WiFi status and DCC™ status.
Rotate the selector ring to the power mode and hold the acti-
vation switch for 4 seconds to turn off the camera. The display
says ‘GOODBYE’. When the display turns black, the camera has
turned off.
You may use a variety of de-
vices to charge your camera.
Use a charger with 2.0 A output
or higher for the minimum
charging time.
2.3 REMOVE MICRO SD CARD
2.5 POWER ON
2.4 CHARGE THE BATTERY
2.6 POWER OFF
Turn the camera off before removing the card.
1) Unscrew the end cap. 2) Push the micro SD card in, them
release it and pull out the card. 3) Screw the end cap on – do not
cross thread it and do not push the O-rings out of place.
C. USB in computer
B. Power Bank
A. Charger in AC outlet
4 sec.
4 sec.
Turn on camera
Turn off camera
1
2
3
1
2
3
4
1
2
3
Содержание DIVE CAMERA
Страница 22: ...For more information visit WWW PARALENZ COM...