1-1
7800-A2-GB28-80
May 1999
Getting Started with OpenLane
Performance Wizard
1
What is OpenLane Performance Wizard?
OpenLane
t
Performance Wizard
t
Version 4.2 provides you with a set of tools
that you can use to monitor, analyze, test, and troubleshoot various network
devices. Using the Performance Wizard, you can:
H
Obtain real time and historical data on various network devices. All
information collected is compiled into charts, based on chart type, and the
information is viewable as graphs.
Use these charts to monitor, analyze, and troubleshoot networks that use
Frame Relay, T1, DDS, Hotwire
r
DSL, MVL network devices, and other
network devices that support MIB-2 Frame Relay Transmission (RFC-1315),
DS1 Transmission (RFC-1406), DS-3 Transmission (RFC-1407), Frame
Relay Services (RFC-1604) MIB variables, and Paradyne Enterprise MIBs.
H
Create and deliver Web-based historical reports to customers that provide
service level verification, capacity planning, and trending data to use to
troubleshoot performance problems.
Web-based reports are available for FrameSaver
r
SLV devices only.
H
Perform Diagnostic Tests that enable you to check the integrity and
performance of network devices, and to some extent, the network itself.
Available tests include the ability to run loopback and pattern tests, as well as
perform a Lamp Test, Connectivity Test, or check EIA Leads Status.
This feature is available for FrameSaver devices only.
This chapter provides you with the information you need to install and start the
OpenLane Performance Wizard application on a variety of operating platforms.
NOTE:
OpenLane Performance Wizard Real Time reports support all Paradyne
devices, as well as other devices, that support standard MIB-2 and Frame
Relay MIBs.
