Getting Started with OpenLane Performance Wizard
1-5
7800-A2-GB28-80
May 1999
Integrating with OpenView or NetView
The Performance Wizard can optionally be integrated with Hewlett Packard (HP)
OpenView (herein referred to as OpenView) or NetView, depending on your
operating platform. Integrating with OpenView or NetView gives you the option of
starting the Performance Wizard, launching Real Time charts, or starting
Diagnostic Tests from within these applications.
The following are the operating platforms and versions of OpenView or NetView
that are compatible with the Performance Wizard:
H
Solaris and HP-UX with HP OpenView Version 5.0 or 6.0
H
AIX with NetView/AIX Version 4.1 and 5.1
H
Windows NT and Windows 95 with HP OpenView Professional Suite D.03.01
OpenView or NetView must be installed on your system, but not running, if you
want to integrate OpenView or NetView with Performance Wizard.
Using Default Paths
During installation, you must accept the OpenLane Performance Wizard defaults
if you want to integrate Performance Wizard with OpenView or NetView. If the
default destination is used, integrating with OpenView or NetView occurs
automatically during the installation. Defaults paths are:
H
For Solaris and HP-UX:
/opt/OV/pdn/PerfWiz
H
For AIX:
/usr/OV/pdn/PerfWiz
H
For Windows 95/NT:
c:\pdn\PerfWiz
Installing Performance Wizard
The OpenLane Performance Wizard software can be installed from CD-ROM or
downloaded from the World Wide Web, then installed on any of the supported
platforms. The World Wide Web site download location is:
http://www.paradyne.com/perfwizard/index.htm
The Performance Wizard Web site provides you with installation instructions,
product information, and details on product updates. The following sections
discuss how to install the Performance Wizard on your operating platform.
