background image

MIM4-A2-GZ42-00

June 2005

7

LED Indicators

Regulatory Notices

UNITED STATES – EMI NOTICE:

!

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.

The authority to operate this equipment is conditioned by the 
requirements that no modifications will be made to the equipment 
unless the changes or modifications are expressly approved by 
Paradyne Corporation.

Table 1. LEDs

LED

STATE

INDICATION

ADDITIONAL 
INFORMATION

Lnk/Alm

(Port 1 – Port 4)

Flashing Green*

Connection is established 
and active.

Traffic is flowing.

Solid Green

Problematic connection.

A connection exists but no data 
is being passed.

No Illumination

Red Alarm. The incoming 
connection to the MIM has 
been lost; no data is being 
received.

If the outgoing connection from 
the MIM has also been lost 
then the remote E1 equipment 
to which the MIM is connected 
will be in Red Alarm as well.

Solid Amber

Yellow Alarm. The outgoing 
connection from the MIM 
has been lost; no data is 
being transmitted.

The remote E1 equipment has 
lost its incoming connection 
and is in Red Alarm.

Pulsing Amber

Blue Alarm. An indirect 
connection has been lost; 
the MIM may no longer be 
receiving data from the 
remote E1 equipment.

The remote E1 equipment has 
lost a connection with an 
intermediate device and is in 
Red or Yellow Alarm.

Act

(Port 1 – Port 4)

Flashing Green

Transmitting data.

Flashing Amber

Receiving data.

*

A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, 
less constant rate.

!

Содержание MIM-4E1









Отзывы: