
1. Network Management Specification
90
June 2004
8000-A2-GB30-30
8.4.3
SNMP-MPD-MIB (RFC 3412)
This MIB provides statistics for message processing. The following scalar MIB objects
will be supported to provide statistics about invalid or unknown conditions in the message
processing:
8.4.3.1
SNMP-TARGET-MIB (RFC 3413_std62)
The device will use the SNMP-TARGET-MIB to configure targets acting mainly as trap
recipients (trap managers). The following MIB objects contained in SNMP-TARGET-MIB
will be
supported
.:
snmpMaxMessageSize
read-only
Based on configuration of the
Emanate/Lite agent. Actual size is set to
1472bytes.
Table 1-106. SNMP-MPD-MIB mib objects
Object
Supported
Comments
snmpUnknownSecurityModels
read-only
As per standard
snmpInvalidMsgs
read-only
As per standard
snmpUnknownPDUHandlers
read-only
As per standard
Table 1-107. SNMP-TARGET-MIB mib objects
Object
Supported
Comments
snmpTargetAddrTable
read-create
Can be used to configure transport addresses that
will be used in the generation of SNMP
notifications (traps or inform).
This table is empty
by default.
snmpTargetParmsTable
read-create
Can be used to configure target parameters (MP
level, Security model, etc.) that will be used in the
generation of SNMP notification messages.
Table 1-108. Default entries in snmpTargetParamsTable
Name
MPModel
SecurityModel SecurityName
SecurityLevel
“template-target-params-v1” 0 (snmpV1) 1 (snmpV1)
“Security-rw”
noAuthNoPriv
“template-target-params-v2” 1 (snmpV2) 2 (snmpV2c)
“Security-rw”
noAuthNoPriv
Table 1-105. SNMP Framework mib objects (2 of 2)
Object
Supported
Comments