manualshive.com logo in svg

Paradyne Hotwire 8620, Справочное руководство, Страница: 114 / 128

Поделиться
Скачать
Paradyne Hotwire 8620 Скачать руководство пользователя страница 114

1. Network Management Specification

108

 

 June 2004

8000-A2-GB30-30

10.2 Paradyne Security MIB (pdn_Security.mib):

The pdn_security MIB is used for enabling applications control security aspects of the unit 
for the purpose of Telnet, FTP, and so on. The various objects supported are as follows:

10.2.1

devSecurityMgrValidation (RW):

This object is used to either enable or disable SNMP source IP validation.  When enabled 
the first check on any incoming PDU is based on the source IP address of the datagram.  If 
the IP address is configured in the securityMgrTable then the community name is checked.  
If the community name is correct then the lowest access level between the table and the 
community name is taken. 

By default, this object is set to disable(1)

.

10.2.2

devSecurityMgrMaxNumber (RO):

The maximum number of managers allowed in the devSecurityMgrTable. By default the 
BAC sets a maximum of 10 security managers.

10.2.3

devSecurityMgrCurrentNumber (RO):

The current number of managers in the devSecurityMgrTable..

10.2.4

securityMgrTable:

A list of the security manager entries. The various objects supported are:

10.2.4.1

securityMgrIpAddress (NA): 

This is used to specify the IP address that identifies the SNMP manager(s) that are 
authorized to send SNMP messages.

10.2.4.2

securityMgrSubnetMask (NA): 

This object is used to specify the subnet mask.

Table 1-131. pdn_Security.mib

Table

Comments

devSecurityMgrValidation 

Supported as is.

devSecurityMgrMaxNumber

Supported as is.

devSecurityMgrCurrentNumber

Supported as is

devSecurityMgrTable

deprecated

newSecurityMgrTable

Not supported

devSecurityTelnetSourceValidation

Not supported

devSecurityFtpSourceValidation

Not supported

devSecuritySNMPMgrAccess

Not supported

devSecurityMgrFailedValidationCount

Supported as is

securityMgrTable

See section 10.2.4

Содержание Hotwire 8620

































































































































Отзывы:

Нет отзывов