Network Configuration Worksheets
A-16
8000-A2-GB21-20
November 1997
Service Domain Configuration Worksheets
For the service domain, select the DSL card you want to configure, and then
configure the following for each of the DSL cards in the HotWire DSLAM:
Perform this task . . .
On this screen . . .
To access the screen . . .
1.
Assign IP addresses to
the DSL card
LAN
interface (e1a).
(See page A-17.)
(HotWire – DSL)
IP Network
From the HotWire – DSL
menu, select:
Configuration
→
Interfaces
→
IP Network
2.
Reset the DSL card
.
(See page A-19.)
(HotWire – DSL)
Card Reset
From the HotWire – DSL
menu, select:
Configuration
→
Card
Status
→
Card Reset
Perform the following tasks only if assigning addresses statically
3.
Create static routes to
end-user systems on
each DSL card
.
(See page A-20.)
(HotWire – DSL)
Static Routes
From the HotWire – DSL
menu, select:
Configuration
→
IP
Router
→
Static Routes
4.
Create default route or a
source route
.
(See page A-22.)
(HotWire – DSL)
Static Routes
From the HotWire – DSL
menu, select:
Configuration
→
IP
Router
→
Static Routes
Perform the following task only if assigning addresses dynamically
5.
Define DHCP relay
features to enable
dynamic IP address
configuration
.
(See page A-24.)
(HotWire – DSL)
DHCP Relay
From the HotWire – DSL
menu, select:
Configuration
→
DHCP
Relay
Use the worksheets in the following sections to record your network configuration
settings. Photocopy the worksheets as needed.
