Network Configuration Worksheets
A-23
8000-A2-GB21-20
November 1997
Static Routes Screen
A-E-A
Prompt
Your Configuration Setting
3. Do
one of the following:
– To create a default route, enter
0.0.0.0 at the
Subnet:
(nnn.nnn.nnn.nnn):
prompt, or
– To create a source route, enter a
host or subnet mask at the
Subnet:(nnn.nnn.nnn.nnn):
prompt.
Subnet Mask =
4. Do
one of the following:
– When creating a default route, enter
the IP address of the default route at
the Next Hop
IP Address
(nnn.nnn.nnn.nnn):
prompt, or
– When creating a source route, enter
the IP address of the source route at
the Next Hop
IP Address
(nnn.nnn.nnn.nnn):
prompt.
Next Hop =
5. Enter a number at the
Input
Number:
prompt to specify the
measurement of preference for this
route over other routes for the same
destination.
1 has the highest preference. The
greater the number the lower the
preference.
Pref=
6. Enter dst or src at the
Source
(Src)/ Destination(dst):
prompt.
S/D=
7. Enter no or press Return at the
yes/no:
prompt to keep the NO value
under the PA (proxy ARP) column.
PA= no
8. When the system highlights
Save
Changes?
, enter yes at the
yes/no:
prompt.
