Network Configuration Worksheets
A-6
8000-A2-GB21-20
November 1997
TASK 3: Assign an IP Address to the Backplane (s1b)
On the IP Network screen, assign an IP address to the backplane (s1b).
NOTE:
You will need to create a separate and distinct network or subnetwork for the
8546 DSL cards and 5446 RTUs, or for 8540 DSL cards. However, the RTUs
associated with the 8540 DSL cards do not need to be included in the
network.
Access the . . .
By . . .
IP Network screen
Selecting
Configuration
→
Interfaces
→
IP Network
from the HotWire – MCC menu.
IP Network Screen
A-C-B
Prompt
Your Configuration Setting
1. Enter the interface name at the
Input
Interface Name:
prompt.
IP Interface = s1b
2. Enter the base IP address at the
(nnn.nnn.nnn.nnn):
prompt.
Base IP Addr =
3. Enter the base subnet mask at the
(nnn.nnn.nnn.nnn):
prompt.
Base Subnet Mask =
4. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool:
prompt.
Peer IP Address =
5. Enter route type NET (for network) at
the
Route to peer (host/net):
prompt.
Route to Peer= NET
