Paradyne 7612 Скачать руководство пользователя страница 93

Страница: 93 / 127

MIB Descriptions

C-6

7612-A2-GB20-00

June 1997

Table C-2.

Interfaces Group Objects (4 of 4)

Object

Setting/Contents

Description

ifOutOctets
(ifEntry 16)

Collects output
statistics on data
received by the

An integer number.

ifOutUcastPkts
(ifEntry 17)

received by the
interface.

Applies to the IMC and

ifOutDiscards
(ifEntry 19)

Applies to the IMC and
the Ethernet port.
Statistics are not
collected if the

ifOutErrors
(ifEntry 20)

collected if the
Ethernet port is
disabled.

Extension to Interface Table (ifXTable)

This extension contains additional objects for the Interface table. Table C-3 shows
the objects supported.

Table C-3.

Extension to Interface Table (ifXTable)

Object

Description

Setting/Contents

ifName
(ifXEntry 1)

Provides name of the
interface.

Interface text strings:

Ethernet Port

Terminal Port

DDS Network

User Data Port

In-band Management Channel

ifLinkUpDown-
TrapEnable
(ifXEntry 14)

Indicates whether the link is
up or down, or enterprise-
specific traps should be
generated.

Only supports DDS network and User
data port.

SNMP Traps must be enabled for the
unit. See

SNMP Traps Option

Table A-9.

ifHighSpeed
(ifXEntry 15)

Reflects the ifSpeed setting
for the interface.

This object is supported as read-only.

ifConnector-
Present
(ifXEntry 17)

Indicates whether there is a
physical connector for the
interface.

true(1) – Will always have this value for
the DDS network, Ethernet port,
Terminal port, and User Data port.

false(2) –Will always have this value for
the In-band Management Channel.

Содержание 7612




























































































































Результаты поиска

Содержание 7612

Отзывы:

Paradyne 7612, Руководство пользователя, Страница: 93 / 127

Результаты поиска

Содержание 7612

Отзывы: