Start-Up
3-2
7610-A2-GB20-00
November 1996
The user interface is blank until activated. Press Return to activate the user
interface. Security can limit ATI access several ways. To setup security or a login
ID, refer to
Security
,
Chapter 4.
Entering Device and System Information
Use the Device Name screen to input DSU device and SNMP system entries. To
access the Device Name screen, follow this menu selection sequence:
Main Menu
→
Control
→
Device Name
main/control/device name
Device Name:
Model: 7610
DEVICE NAME
Device Name:
NE815378
Clear
System Name:
lllQJ98-001
Clear
System Location: Bldg. A412, 2nd Floor, Left cabinet
Clear
System Contact:
Joe Smith 800-555-5555 pager 888-555-5555
Clear
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
MainMenu
Exit
Save
Î
Î
ÎÎ
ÎÎ
Any printable ASCII characters are valid entries for all the Device Name screen
inputs. Refer to the
ASCII Characters
section in Appendix A. The Device Name
field is alphanumeric and provides for an input of 20 characters. The Device
Name entry appears on all ATI screens. The input on this screen is displayed on
the Identity screen. Refer to the
Identity Information
section.
System Fields
The three System entry fields are alphanumeric and provide 127 characters for
each field. The System entries appear on the Identity display as shown in the
next section. The SNMP System entry fields are:
System Name: The general SNMP system name
System Location: The physical location of the SNMP managed device
System Contact: Identification information, such as contact name, phone
number, or mailing address
Press Ctrl-a to switch to the screen function key area below the dotted line.
Select Save and press Return. When Save is complete, Command Complete
appears at the bottom of the screen.
