Paradyne 3350 Скачать руководство пользователя | Manualshive

Страница: 80 / 122

background image

ACCULINK 3350 E1 NTU

C-14

June 1996

3350-A2-GB20-10

Table C-7

(2 of 2)

SNMP Trap Configuration Options

Entp Trap: Enab
Next Enab Disab Prev

Enterprise Specific Traps. Specifies whether enterpriseSpecific traps are enabled. For more information, refer to the
SNMP Traps section in Chapter 4, Maintenance.

Enab – Sends trap messages for enterpriseSpecific events to the currently configured trap manager(s).

Disab – Disables the sending of trap messages for enterpriseSpecific events.

NOTE: This configuration option is not available if the SNMP Trap configuration option (in the

Alarm Configuration

Options section) is disabled.

Link Trap: Both
Next Disab Up Down Both Prev

Link Trap Type. Specifies the link trap type to enable. Interfaces monitored for linkUp and linkDown traps are specified
with the Trap I/F configuration option. For more information, refer to the

SNMP Traps section in Chapter 4, Maintenance.

Disab – Disables the sending of trap messages for linkDown or linkUp events.

Up – Sends trap messages for linkUp events to the currently configured trap manager(s).

Down – Sends trap messages for linkDown events to the currently configured trap manager(s).

Both – Sends trap messages for linkUp and linkDown events to the currently configured trap manager(s).

NOTE: This configuration option is not available if the SNMP Trap configuration option (in the

Alarm Configuration

Options section) is disabled.

Trap I/F: E1s
Next NET DTE E1s Prev

Link Trap Interfaces. Specifies which interfaces generate linkUp and linkDown trap messages. These traps are supported
on the E1 interfaces (network and G.703 DTE).

NET – Sends trap messages for linkUp, linkDown, enterpriseTestStart, or enterpriseTestClear events occurring on the
network interface.

DTE – Sends trap messages for linkUp, linkDown, enterpriseTestStart, or enterpriseTestClear events occurring on the
G.703 DTE interface. This selection is not displayed if the G.703 DTE interface is disabled.

E1s – Sends trap messages for linkUp, linkDown, enterpriseTestStart, or enterpriseTestClear events occurring on either
the network or G.703 DTE interface.

NOTE: This configuration option is not available if the Link Trap configuration option is not configured to generate trap

messages for linkUp or linkDown events.

«
...
78
79
80
81
82
...
»

Содержание 3350



























































































































Отзывы:

Нет отзывов

Похожие инструкции для 3350

Бренд: Telex Страницы: 6

SeaLINK+232 2101

Бренд: SeaLevel Страницы: 15

Бренд: I-GO Страницы: 2

Бренд: i-tec Страницы: 28

Бренд: Rocstor Страницы: 2

Бренд: TP-Link Страницы: 33

Бренд: Bose Страницы: 124

Бренд: Planet Страницы: 72

Бренд: Pandigital Страницы: 5

Бренд: StarTech.com Страницы: 2

Бренд: Tripp Lite Страницы: 4

Бренд: Zonet Страницы: 32

Miracle WiFi 150N HighGain

Бренд: Miraclebox Страницы: 20

Бренд: Roving Networks Страницы: 8

Бренд: Krown Страницы: 1

Pavilion zt3000 - Notebook PC

Бренд: Compaq Страницы: 10

Бренд: Planet Networking & Communication Страницы: 2

Бренд: TRENDnet Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды