Paradox MG-6130, Справочное и монтажное руководство

Страница: 7 / 52

Paradox Magellan Systems 5
WARNING! When testing the hardware, the speaker and
sirens will also be tested. Avoid close proximity to the
Magellan console when performing the hardware test to
avoid any damage to your hearing.
When you are done the next menu option will appear. Press
[
NEXT
] until you see the “Passwords” menu or press the [8] key
to immediately access the “Passwords” menu.
6.Signal Strength
1. From the “Signal Strength” menu,
press [
OK
].
2. The Magellan will begin testing
the noise level and signal
strength of all assigned wireless
transmitters. Press [
NEXT
] to
navigate through the various
tests.
Press [
EXIT
] when you are done.
7.Passwords
1. From the “Passwords” menu,
press [
OK
].
2. Select which password(s) or
code(s) you wish to program by
pressing [
NEXT
] and press [
OK
]
when the desired password
appears. The following
passwords can be programmed:
- Installer code
- Maintenance code
- Panel ID
- PC Password
When you are done the next menu option will appear. Press
[
EXIT
].
For more in-depth programming of the console’s
passwords, see User Codes on page 14 and WinLoad
Software Settings on page 38.
8.Time and Date
1. Press the [
MENU
] key.
2. Press [
NEXT
] until you reach the
“Time and Date” menu and press
[
OK
] or press the [3] key to
access the “Time and Date”
menu.
3. Select the time format (12Hr-
clock or 24Hr-clock) and then
program the time. Press [
OK
]
when done.Program the date by
entering the 4-digit year first,
followed by the 2-digit month and
then the 2-digit day. Press [
OK
]
when done.
Deleting Zones
1. From the “Zone Profile” menu,
press [
OK
].
2. Select which zone you wish to
delete by pressing [
NEXT
] and
press [
OK
] when the desired zone
number appears.
3. Press [
YES
].
4. Press [
YES
]. To delete another
zone, press [
YES
] and then repeat
steps 2 to 4.
When you are done the next menu option will appear. Press
[
NEXT
]
until you see the “System Test” menu or press the
[5]
key
to immediately access the “System Test” menu.
For more in-depth programming of the console’s zones, see
Zone Programming on page 15 and When hardwired zones are
used, the EOL Resistor Option must be enabled for UL
installations.Wireless Programming on page 18.