6
728: [1/2] [3/4] [5] [7/8]
[key in 086][ON key BYP][ENTER], to enable zone 2-wire smoke detector to input 3 (as zone 5 in zone
doubling)
5. Utility
Walk test
Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing
Press [ENTER][2828][8][CLEAR], to activate walk test mode.
Press [ENTER][2828][8][CLEAR], to de-activate walk test mode.
To reset panel back to factory default
1.
Remove the battery and switch OFF AC power.
2.
Short the PGM and zone 1 terminal (labeled as 1) with a wire.
3.
Power ON AC and connect the battery.
4.
Wait for 10 seconds then remove the wire.
