2
Step 2: To program features
Press [ENTER] [2828] or [282828] , you are in the programming mode, ENTER key is flashing
[key in 088], [ON key 1,2,3,4,5,6,7,8, 9 &12] & [OFF key MEM]
[key in 090], [ON key 11 or/and 12], for keypad zone
[key in 049], [enter 060], for exit delay 60 seconds
[key in 050], [enter 060], for entry delay 60 seconds
[key in 053], [enter 003], for zone speed 45 ms. (for vibration sensor). 004 for 60 ms, 005 for 75 ms.
* Choose either Step 3A or 3B
Step 3A: To call CMS
Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing
[key in 038][press 10 then 10], contact ID format
[key in 086][ON key 7 & 12][ENTER][CLEAR], to call CMS phone.
[key in 090][ON key 10][ENTER][CLEAR], to enable Duress signal.
[key in 046][enter 001], for daily test
[key in 047][enter HHH], for hour
[key in 048][enter HHH], for minutes
Press [ENTER] [2828] or [282828] ,then [7], you are in the streamline programming mode, ENTER key
and 2ND are flashing.
[key in 04][enter phone number 1][ENTER][CLEAR], CMS phone number 1
[key in 06][enter phone number 2][ENTER][CLEAR], CMS phone number 2
[key in 08][enter 8888 8888][ENTER][CLEAR], account number
Note: to clear phone number, replace digit with [2ND]
Step 3B: To call Handphone
Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing
[
key in 037][enter 7 then 2ND], waits for 15 rings call duration
[key in 038][enter TRBL then TRBL], pager format
[key in 086][ON key 7, 11 & 12][ENTER][CLEAR],
to call phone 1 and phone 2 each ONE time
Note: if only [ON key 7 & 12, OFF key 11][ENTER][CLEAR], to call ONLY phone 1 one time
[key in 090][ON key MEM],
Press [ENTER] [2828] or [282828] ,then [7], you are in the streamline programming mode, ENTER key
and 2ND are flashing.
[key in 36][enter 33333333], to report zone 1 to 4
[key in 37][enter 33333333], to report zone 5 to 8 (program only if these zones are used)
[key in 38][enter 3333], to report zone 9 to 10
[key in 64][enter 2ND 2ND 333333][ENTER][CLEAR], to report panics
[key in 04][enter phone number 1][ENTER][CLEAR], handphone number 1
[key in 06][enter phone number 2][ENTER][CLEAR], handphone number 2
[key in 08][enter 8888 8888], account number
