24
•
Connect Double Burner to Gas Source
GSL-SB2B Double Side Burner Operator Manual
Never connect the appliance to an unregulated gas supply line.
Burner units operated without a proper regulator are unsafe and may
cause serious bodily injury or death, and property damage.
Operating the burner without the proper regulator is dangerous and
may result in extreme temperatures, fire or explosion that causes
serious bodily injury, death and/or property damage. Any use of the
burner unit without a proper gas regulator will void the warranty.
Liquid propane gas is not natural gas. The use of NG in an LP
configured burner, or LP in an NG configured burner, is extremely
dangerous and voids your warranty.
Operation without a proper gas regulator will void all burner unit warranties.
Burner units operated with NG must be connected to the NG supply with NG flexline and the supplied NG
regulator. The NG valve is pre-set at the factory for proper operation. Contact your gas supply dealer and
use a licensed contractor or installer if you desire to convert your burner unit to LP gas supply.
Burner units operated with LP gas require an LP regulator set to 11.0" water column pressure. The self-
contained LP system burner unit is designed to be used with a standard 20 lb., 12 1/4" diameter, 18" high
cylinder with right-handed connection threads; this is the maximum size LP tank to be used. The cylinder
must be marked in accordance with:
•
U.S. Department of Transportation CFR49 Part 173 Specifications for LP Gas Cylinders
•
National Standards of Canada CSA-B339 Cylinders, Spheres and Tubes for the Transportation of
Dangerous Goods
The propane tank must be fitted with an Overfill Prevention Device (OPD). Do not twist the gas supply hose.
Connection
Slide the burner unit forward as needed to gain access to the regulator and gas connection point in the rear.
With the burner unit slid forward, support the front edge to prevent the
unit from tipping and falling out of the island cut-out, which could
cause personal injury and/or damage to the burner unit.
A licensed plumber must install the required plumbing to supply your
NG burner unit.
