PARADISE GRILLS GSL-SB2B Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

PARADISE GRILLS GSL-SB2B Скачать руководство пользователя страница 28

26

•

Connect Double Burner to Gas Source

GSL-SB2B Double Side Burner Operator Manual

Figure 18 Example Regulator

1.

Inspect the head of the gas cylinder and head of the regulator valve to ensure there is no debris; use

a soft brush to remove any debris

Do not insert a tool or foreign object into any gas valve, which could

cause damage and cause a leak. Leaking propane may result in

explosion, fire, severe personal injury, or death.
When the burner unit is not in use, completely turn off the gas supply

at the LP gas cylinder.
Never store the burner unit indoors with the LP gas cylinder

connected. Always disconnect and remove the LP gas cylinder from

the burner unit before storing the burner unit indoors.

2.

Ensure all burner unit control valves are in the OFF position

3.

Turn the LP cylinder OFF by turning the hand wheel clockwise until it stops

4.

Remove the safety cap from the LP cylinder valve (below left)

5.

Insert the regulator nipple into the LP cylinder valve – keep the regulator in line with the LP cylinder

valve to avoid cross-threading (below right)

Figure 19 LP Cylinder Connection

6.

Rotate the regulator coupler nut clockwise until you meet resistance, then tighten another 1/2 to

3/4 turn. Tighten by hand only – do not use any tools

«
...
26
27
28
29
30
...
»

Содержание GSL-SB2B













































Отзывы:

Нет отзывов