Paradise Datacom RA 5785, Руководство по эксплуатации

Страница: 33 / 82

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 33
rate is 9600. You will be asked to verify that you wish to change the Baud
Rate. Communication with the amplifier may be affected.
[ 7 ] Standby Mode: Selects between Hot and Cold standby mode for units in
redundant systems.
[ 8 ] BUC Reference : Selects between an Internal or External reference for an
optional block up coverter integrated with the unit, or allows the unit to Auto-
switch between Internal and External reference.
[ 9 ] Attenuation Level: The Gain Adjustment of the unit is adjustable here, from
0 to 20 in 0.1 db steps.
[ 10 ] Amplifier Network Address: Sets a network address for the unit. Range
is 0 to 255. You will be asked to verify that you wish to change the
Amplifier Network Address. Communication with the amplifier may be
affected.
[ 11 ] Fault Thresholds : Allows the user to set the limit for triggering the unit’s
Current Fault or High Temperature Fault.
Low Current Fault Threshold : This setting is factory pre-set.
High Temperature Alarm Threshold : Range is 0 to 125 °C.
[ 12 ] Fault Setup : This feature allows the user to set the Spare Fault Trigger
using the Spare Fault Wizard.
Click on the Spare Fault Wizard button, which opens a new window. See
Figure
3-11 . Select between the following fault triggers: External Reference Level, LNB
Current, External Mute, or None. Set the range of maximum and minimum
thresholds that would trigger the selected fault, and configure the fault handling
via a pull-down menu. Choose between Major Fault, Major Fault with Mute, and
Minor Fault. Click [OK] to set the fault trigger for the Spare Fault.
Figure 3-11: Spare Fault Wizard