Paradise Datacom RA 5785, Руководство по эксплуатации

Страница: 25 / 82

Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 25
Units may ship with a RS-232 Quick Start cable fitted with a DB9 connector. See Figure 3-6 .
3.2 Quick Start Operation
This section describes the necessary steps to communicate with a Mini Compact Outdoor
SSPA using the Ethernet Quick Start cable and the Universal M&C Software. The Paradise
Datacom Universal M&C Software is a free Windows-based application that can be
downloaded from the company web site, www.paradisedata.com.
Both the Ethernet and Serial Quick Start Cables force the Mini Compact Outdoor SSPA into a
known state. Once communication is established using these cables, all permanent settings
must be saved to the unit. If changes are not saved, the unit will revert back to the state
before the Quick Start cables were used.
3.2.1 Set PC Configuration
To set your Windows-based PC to remotely communicate with the Mini Compact Outdoor
unit, perform the following steps.
If using Windows XP:
1. Open the PC’s Control Panel (Start Menu
→
Settings
→
Control Panel);
2. Double-click on the Network Connections icon;
3. Right-click on the Local Area Connection icon and select
Properties
;
4. Select Internet Protocol (TCP/IP) and click on the
Properties
button;
5. Select “
Use the following IP address
” and enter the following information:
IP address : 192.168.0.1
Subnet mask : 255.255.255.0
6. Click the “
OK
” button and close out of all of the Control Panel windows.
Figure 3-6: RS232 Quick Start Cable, 207988