PARA Dox Digiplex DGP-620, Руководство пользователя

Страница: 15 / 54

LED Keypads 13
If enabled by your installer, the One-Touch Buttons
(section 3.6 on page 14) or a keyswitch (section 3.7 on
page 15) can also be used to arm the area.
3.5 F
ORCE
A
RMING
Force Arming allows you to arm your system when specific
zones are open. Certain zones can be programmed by the
installer to remain unarmed when you initiate Force Arming.
Once the open zone is closed, however, the system will then arm
it as well. Only
User Access Codes with the Force Arm option
enabled can Force Arm the system. Also, see section 3.8 on
page 16 Auto-Arming for another everyday arming option.
This feature is commonly used when a motion detector is
protecting an area that is occupied by a keypad. During Force
How do I Instant Arm?
1) Enter your [
ACCESS CODE
] .
The keypad will emit a Confirmation Beep. The [
ACCESS
]
Symbol will flash.
2) Press the button.
If you have access to more than one area, press the Number
Button representing the area you want to Instant Arm or
[0]
for all assigned areas.
After the Confirmation Beep, the Exit Delay Timer will begin
the countdown to arming.
KLEDEU03.fm Page 13 Friday, May 4, 2001 11:25 AM