Page 12
PaperFolder.com
SETTING PAUSE INTERVALS
The PH14 can be set to pause for a set period after one or more folds. There are several situations
where this is handy, such as:
1. THE COUNTER STOPS BEFORE COMPLETING THE STACK
Remedy: Increase the time between each sheet.
a. Press the C button.
b. Press and hold the Count button until xxxmS appears. Now you can set the pause time.
Press the button repeatedly until the counter reads 125mS.
c. Press the C button
d. Press the Count button so that 1 shows. It will pause for that time after every sheet
e. Press the C button
f. Press the Start button. Stop when you have the number of sheets you want.
2. SET A PAUSE AFTER A CERTAIN NUMBER OF FOLDS
You want to fold a certain number, and then stop so you can remove that number as a set.
Remedy: Increase the time between each set.
a. Press the C button.
b. Press and hold the count button until a xxxmS appears. Press the button repeatedly until
the counter reads 5S (5 Seconds).
c. Press the C button
d. Press the counter button so that the number in the set you want shows (e.g., 100).
e. Press the C button
f. Press the Start button.
g. The machine will stop after it folds the number you set. Remove them. It will start again
after the period you set expires.
h. Stop when you have the number of sets you want.
SETTING THE FOLDING SPEED
The folding speed is set at M3 from the factory. This is the recommended speed for the machine. If
you are using it with a knife folder or stacker, it must be used. You can change it by holding down
the Stop and C buttons simultaneously, getting to Motor Speed, and push the upper left button to
increase or the lower left button to decrease the speed. We recommend that you do not change
this.
SUCTION T
One of the readings on the control panel is Suction T. It should read 360ms. This is not a user
adjustable setting. Please make sure it reads 360ms.
