PAP Team TINOX, Руководство пользователя

Страница: 24 / 30

Torque setting 1,1 Kgm (11 Nm)
Torque setting 0,8 Kgm (8 Nm)
If you do not have a torque wrench just tighten the bolts slightly more than the maximum pressure.
NEVER START THE ENGINE WITHOUT PROPELLER OR GEARBOX FITTED.
Its very important to check the propeller tracking. This is the difference between the tips of the propeller on its path during
rotation. If the tracking of the propeller occurs it means that the propeller bolts may have been tightened asymmetrically. On
engines without clutch: Take away the spark plug so that the propeller can turn easily. Turn the propeller, and make sure the tips
of the propeller pass through the same axis during rotation.
Every time the propeller is fitted it is necessary too tighten the bolts before the next flight. Check that the propeller is not
damaged fixed properly and turns correctly and smoothly. Listen for any unusual noises that might come from the engine or the
Engines with the propeller turning right . In flight position:
· POLINI THOR 80 · POLINI THOR 130 · POLINI THOR 200 · POLINI THOR 250
For the Helix propellers the reference stickers should be on the same side, once the propellor is
mounted the stickers will be on the side looking towards the engine.