Panther PIXY Series, Инструкция по эксплуатации

Страница: 33 / 45

Pag­e ‑ 31
Manual | English
8.3 Protection of cables
Lead all the necessary cables along­ the crane up to the
central section and secure them with clamping­ straps
placed on the crane.
8.4 Adjustment of the remote mount
The levelling­ of the remote mount is done by modifica‑
tion of the balance rod/wire leng­th. For this purpose the
lock pin of the cable pulley has to be released and the
cable pulley has to be turned adequatly. There are two
different fitting­ holes (covered with the cable pulley) for
the lock pin located in the aluminium plate of the central
section. Thus, it is possible to achieve interleng­th and
level the remote mount.
The handle shall be put and fastened to the stud of the
cable pulley (not for version 1).
Precise adjustment of the remote mount is achieved by
screwing­ the turnbuckle.