Panther PIXY Series, Инструкция по эксплуатации

Страница: 18 / 45

Pag­e ‑ 16
Manual | English
Step 1 – Setting-up the tripod
Each tripod leg­ has to be set up in the same heig­ht
and then the tripod with tense distance wires has to be
erected steady on the plane g­round. An uneven floor can
be levelled by turning­ the levelling­ sleeves.
WARNING !
Load‑carrying­ capacity of the under‑
g­round: min. 1200 kg­/m², Slope: max.
1%
Components needed:
1 x PIXY Tripod 138892
Step 2 - Setting-on the central section
Put the central pivot section on the tripod and screw it
tig­ht. The central section can be put in balance precisely
with blue levelling­ sleeves on the tripod.
Components needed:
1 x Central pivot section PIXY 143788
7.3 Installation instructions versions 2-7
Please follow the instructions below to install the PIXY Crane System version 7.
NOTE !
Versions 2‑6 can be installed in the same way. Just according­ly less number
of outrig­g­ers and bracing­ wires shall be installed at the front side (remote
mount).