Pantech Verizon TXT8035PP, Руководство пользователя

Страница: 11 / 50

18 19
02
03
04
05
06
07
01
INSTALL BATTERY
1. Insert your fingernail into the slot(1), then push down on
top of the battery cover and slide it off to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts
and push down (4) until you hear the “click”.
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.
If the battery is not correctly placed in the compartment,
the handset will not turn on and/or the battery may detach
during use.
Correct Incorrect
Correct Incorrect
REMOVE BATTERY
1. To remove the battery cover, insert your fingernail into
the slot(1), then push down on top of the battery cover
and slide it off (2).
2. Insert your fingernail into the slot (3) and lift the battery
from the compartment (4).
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.
CHARGING YOUR BATTERY
1. Connect the USB data cable into the cableless wall
adapter.
2. Plug the USB data cable into the phone’s Charging/
Data Jack (making sure to align the connector as it
appears in the image to the right) and the wall adapter
end into an electrical outlet.
If the battery connector is not properly aligned, damage could occur to the charging
connector and the phone may not charge.
Correct Incorrect
Correct Incorrect