Panoramic TVP-2914, Руководство по обслуживанию

Страница: 29 / 52

TVP-2914
28
3.5 Screen adjustment
Mode 1 :
a) Apply a gray scale pattern.
b) Adjust the controls to:
ü
Brightness - 50%
ü
Contrast - 70%
c) Measure DC voltage on the three cathodes (CRT) (one at a time) and select
the highest one.
d) Connect a X100 test tip to the selected cathode (highest voltage DC).
e) Adjust the screen potentiometer to obtain 130V, according to the illustration
bellow:
Note. The oscilloscope should be positioned in the vertical mode.
150 Volts
GND
Mode 2 :
a) Select the register 99 ( VSD ).
b) Press VOL
Ø
or
×
VOL to select and adjust the screen control localized on
the FBT, until the horizontal line be slightly visible on the screen center.
3.6 AGC adjustment
Mode 1 :
ü
Apply a PHILIPS pattern with 60dB
µ
V of intensity and adjust the delay
until obtain 3.5V in AGC pin of tuner.