© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 47 of 73
8-2013
Cont. Mode
1/3
>
Automatic
Manual
Exit
B-3 Pre-Printed
This function can set the paper length and gap size before auto-calibrate the
sensor sensitivity. It can to get the sensor sensitivity accurately.
Bline Mode
3/4
Manual
>
Pre-Printed
Exit
When entering [Pre-Printed] option, you will see following message. Please complete
these steps :
Paper Len.
00812 dot
1. Press the
button to move the
cursor from left digit to right digit, and
press the
button to set the value
from “0” to “9” and the “dot/ mm/ inch”.
Press the
button to set the
paper length into the printer.
Bline Size
0024 dot
2. Press the
button to move the
cursor from left digit to right digit, and
press the
button to set the value
from “0” to “9” and the “dot/ mm/ inch”.
Press the
button to set the
gap size into the printer.
Bline Mode
Pre-Printed
3. Then, printer will feed labels to
calibrate the sensor sensitivity
automatically. When calibration is
completed, the LCD screen will
return to the previous menu.
C. Cont. (Continuous media) Mode
Press the
and
buttons to scroll the cursor to the sensor type. Press
the
button to enter the continuous media sensor calibration mode.
Calibration 3/4
Bline Mode
>
Cont. Mode
Exit
