© Panduit Corp. 2013
USER MANUAL
TDP43HE, TDP43HE/E,
TDP46HE & TDP46HE/E
B20730-01
Page 36 of 73
8-2013
Print Speed
6
Tear Off
+000
Print Mode
1/4
>
Tear Off
Peel Off
Cutter
3.1.2-2 Print Speed:
Print Setup
2/17
Darkness
>
Print Speed
Tear Off
Use this option to setup print speed. The each increment/decrement is 1 ips. Press
key to raise the print speed, and press
key to decrease print speed.
Press
key to set it into printer. Press
key to cancel the setting and
return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.2-3 Tear Off:
This option is used to fine tune media stop location. Press the
button to
move the cursor from left digit to right digit, and press the
button to set the value from
“+” to “-” or “0” to “9”. Press the
button to set the value into printer. Press
key to cancel the setting and return to the previous menu. The default value is
+000.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.2-4 Print Mode: (Tear Off / Peel Off / Cutter)
Print Setup
4/17
Print Speed
Tear Off
>
Print Mode
This option is used to set the print mode. Printer default setting is Tear Off. When enter this
list, the print mode in the right side of “
>
” icon is the printer current setting. Press
and
to select the different print mode and press
button to enable the
setting. Press
key to cancel the setting and return to the previous menu.
Print Setup
3/17
Darkness
Print Speed
>
Tear Off
