Panduit SynapSense Pressure Node, Руководство по установке

Страница: 15 / 38

14
Cabinet and Subfloor Installation
Perform the following steps to install a Pressure Node in or underneath a cabinet:
1. Prepare and route the diffuser hose.
a. Determine Pressure Node location (inside or underneath cabinet)
b. Determine necessary lengths for the low- and high-pressure
hoses: low pressure hose length one (1) ft. maximum; high
pressure hose length three (3) ft. maximum. Otherwise, cut to fit
hose.
c. Cut diffuser hose using scissors or utility knife.
d. Attach short hose to the low-pressure (-) inlet using gentle but
firm pressure.
e. Remove tile to the subfloor cavity near
the cabinet with a tile puller.
f. Secure the long diffuser hose to the
stanchion with a plenum-rated zip tie,
with diffuser pointed down.
Warning: Do not allow diffusers to lay on subfloor. Position the
diffuser on stanchion a minimum of four inches from the subfloor and
four inches from the underside of the tile floor.
PRESSURE NODE INSTALLATION MANUAL