Panduit SynapSense 1167, Инструкция по установке и использованию

Страница: 35 / 40

35
Config
Link
Green
A 100Mbps link exists in network PHY
Flashing
Green
A 100Mbps link exists at PHY and there is IEEE
802.3 data activity.
Yellow
Ethernet 10Mbps link established in network
PHY.
Flashing
yellow A 10Mbps link exists at PHY and there is IEEE
802.3 data activity.
Indicator Status Description
PoE
Green
Gateway is receiving remote power via Ethernet
Data Port (i.e. via a remote PoE enabled Network
Switch).
Off Gateway is not receiving remote voltage via PoE.
Power
Green Local 24 VDC nominal power supply is ON
Off
Local power source is not connected to M12 or is
powered OFF
Red Wireless sensor network or configuration error.
Green Wireless sensor network operating normally
Blue Flash IEEE 802.15.4 Wireless Packet Transmission Active
NOTE:
Any remaining LEDs not described are for the manufacturer’s use only,
specifically Network Status and RUN for the illustrated Industrial Gateway.