Panduit SynapSense 1167, Инструкция по установке и использованию

Страница: 32 / 40

32
Radiated Emissions IEC 61131-2:2007 Edition 3.0
EN55011 Class A, IEC/CISPR 32(2015)
EN55032, IEC/CISPR 11(2015)
Conducted Emissions IEC 61131-2:2007 Edition 3.0
IEC61000-6-4:2011 Edition 2.1
EN 55011 Class A, IEC/CISPR 32(2015)
EN55032, IEC/CISPR 11(2015)
ESD immunity IEC 61131-2:2007 Edition 3.0
IEC 61000-4-2:2008
6kV contact discharges
8kV air discharges
Radiated RF immunity IEC 61000-6-2-1:2016
IEC 61000-4-3:2010
10V/m with 1kHz sine-wave 80% AM from 80MHz to 1000MHz
3V/m with 1KHz sine-wave 80% AM from 1.0GHz to 6.0GHz
EFT/B immunity IEC 61131-2:2007 Edition 3.0
IEC 6100-4-4:2012 Edition 3.0
±3kV at 5kHz on Power and Ethernet ports
Surge transient immunity IEC 61131-2-1:2007 Edition 3.0
IEC 61000-4-5:2014
±1kV line-earth (CM) on Ethernet ports
±1kV line-earth (CM) on Local Power port
Conducted RF immunity IEC 61131-2:2007 Edition 3.0
IEC 61000-4-6 Edition 4.0:2013
10Vrms with 1kHz sine-wave 80% AM from 150kHz to 80MHz
Power Ports M12 Local Power, A-Coded, Port Pinout: CIP™ Networks Library, Volume 1,
edition 3.13
Input voltage: 10-30VDC (maximum continuous Voltage at port)
“Worry Free Polarity Connection”
Current draw: 150mA@ 24VDC nominal (no PoE supply)
M12 Data Port, D-Coded, Power over Ethernet (PoE) M12-D Coded
PoE: IEEE 802.3.af:2003
Required Source voltage: per IEEE 802.3.af
Maximum Load of Gateway:4Watt (using PoE supply only)
DATA and CONFIG
Ethernet Ports
IEEE 802.3, 10/100Mbps, 100meter maximum length of cabling
M12 Connector Pinouts per Volume 2, EtherNet/IP Adaptation of CIP™.
Edition 1.14
Antenna Port RP-SMA, Rated IP67 ;
Required External Antenna for FCC & IC Canada (ISED) Certification: LSR 001-
0010 or equiv.
Additional Extension Cable (if needed); Required to Maintain
FCC & IC Certification: Type CNT-240 or equiv.
FCC Approval
ISED Approval CFR 15.247, FCC ID:U62-1167
RSS-247, Issue 2, ISED Canada Id 7265A-1167