SMARTZONE UPS USER MANUAL
38
button to scroll up through the Setup pages or down through the Setup pages.
Note:
Using the DOWN button to transition out of the last Setup page will automatically
save any settings changed during the Setup Operation mode session and transition
back to the Monitor Operation mode, so do not scroll down past the last page before all
the settings have been changed.
Scroll to the desired Setup page that needs to be changed, by pressing the UP or
DOWN button.
Note:
The Setup page number appears in the center brackets on the Setup pages.
Press the ENTER button. The changeable Setup value will start to blink. Scroll through
the Setup values, by pressing the UP or DOWN button. When the desired Setup value
is present, press the ENTER button to lock in that value. Move to another Setup page if
desired, by pressing the UP or DOWN button. Repeat the above process for that Setup
value.
Note:
The Setup Operation mode will automatically close and not save any Setup value
changes after 30 seconds of no button presses.
Note:
Pressing the CANCEL button at any time while in the Setup Operation mode will
automatically close and not save any Setup value changes. To save all Setup value
changes in the current session, press the DOWN button several times to scroll down
through the last Setup page, then the UPS will save all the settings and transition to a
Monitor Operation mode.
Double Conversion VRLA UPS
The double conversion VRLA UPS has nine Setup pages. Remember that scrolling
down through the 9
th
Setup page will automatically save any settings changed during
the Setup session and transition back to the Monitor Operation mode.
The following table shows an example and description of all 9 Setup pages in the
double conversion VRLA UPS unit.
