INSTRUCTIONS CM365
For Technical Support: www.panduit.com/resources/install_maintain.asp
Step 7: Cisco Aironet 1250 Series Access Point Wall Mount and In-Ceiling Installation
1. Install the mounting bracket supplied with the access point using the (4) #10-32 X 3/8”
thread cutting screws as shown in
Figure 7.1
2. Install wireless access point per manufacturers instructions to the mounting bracket as
shown in
Figure 7.2
3. Install dipole antennas as shown in
Figure 7.3
for wall mounting applications.
4. Install dipole antennas as shown in
Figure 7.4
for in-ceiling mounting applications.
Page 5 of 8
Mount bracket supplied
with the access point
UP
To release depress
lever and slide AP
towards hinge side
of enclosure
Slide access point feet
into mount plate slots
Wall Mount Dipole
Ceiling Mount Dipole
#10-32 Screws
7.1
7.2
7.3
7.4
Antenna Configuration
Antenna Configuration