INSTRUCTIONS CM365
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
Fax
:
(708)444-6448
www.panduit.com
Page 8 of 8
Figure 2.2
Figure 2.3
Figure 2.4
“Long” flange (STD)
(Dipole Antenna Applications)
“Short” flange (opposite side)
(External Antenna Applications)
#6-32 Screws
Reverse plate 180°
Figure 2.1
Mount Plate
RP-TNC
Knockouts
Option 2: Wireless Access Point with External Antennas; Alternate In-Ceiling Installation
2.1 Remove RP-TNC knockouts as shown in
Figure 2.1
for in-ceiling mounting.
2.2 In order to use bulkhead extender cables the mount plate must be rotated 180
°
. Reverse the mount plate by
removing (4) #6-32 screws and fastening the mount plate to the enclosure base using the “short” mount flange.
2.4 Install access point as shown in
Figure 2.2
for in-ceiling mounting.
2.5 Install the bulkhead extender cables as shown in
Figure 2.3
.
2.6 Attach antenna extenders to wireless access point as shown in
Figure 2.4
.
RP-TNC
Knockouts
