Panduit DPOE12U1XY Скачать руководство пользователя страница 59

Страница: 59 / 67

PANDUIT

DPoE

™ Power Patch Panel User Manual

Part Number: PN378E

WARNING:

The power supply connections are polarized.

The

DPoE

™ Power Panel will not function if power is wired improperly.

NOTE:

The included power harness has two wires for the A-feed power only (pins 1 & 2).
The

DPoE

™ Power Patch Panel supports an optional redundant B-feed power option,

but the terminals and wire leads are not attached to the power harness.

Contact

PANDUIT

Technical Support for more information about connecting the

redundant B-Feed Power.

13. Lightly tug on the butt spliced connections to verify that the butt splices are secure.
14. Plug the connector into the back of the

DPoE

™ Patch Panel.

15. Attach the top and bottom rear shields to the panel using the tabs on the shields. Be sure that the

compliant conductive foam on the shields is in contact with the copper tape applied to the cables.
Close the shields together over the cables and secure with

PAN-TY

's (

PANDUIT

part no.

PLT1.5I-M). Fasten the shields together using US standard screws with the grounding strap in-
between the screw and the shields.

Содержание DPOE12U1XY




































































Результаты поиска

Содержание DPOE12U1XY

Отзывы:

Похожие инструкции для DPOE12U1XY

Бренды по названию

Популярные бренды

Panduit DPOE12U1XY, Руководство пользователя

Результаты поиска

Содержание DPOE12U1XY

Отзывы:

Похожие инструкции для DPOE12U1XY

Бренды по названию

Популярные бренды