Panduit DPOE12U1XY Скачать руководство пользователя страница 14

Страница: 14 / 67

PANDUIT

DPoE

™ Power Patch Panel User Manual

Part Number: PN378E

Power Requirements

11. If the panel is being powered by a

DPoE

™ Power Supply (See page 9,

Table 1: Power Supplies

Available from PANDUIT

for a list of available powering options), skip to

Powering Up the

DPoE

™

Power Patch Panel

Section below, since the

DPoE

™ Power Supply is equipped with a

matched keyed power connector that will fit the power connector on the back of the panel.

12. If the panel is being supplied by a

DPoE

™ Power Chassis or a direct 48VDC source, cut the 10-

foot power harness to length then strip the ends of the leads to 5/16” (7.9 mm). Connect the
stripped ends of the power harness into the

DPoE

™ Power Chassis. If the power harness is not

long enough or the 48VDC source requires a specific connector, strip the ends of the wire to the
same strip length, being careful not to damage the conductors.

13. Using the two butt splices provided with the panel, and paying attention to the polarity of the

supply voltage, crimp the power harness wires to the supply wires. A crimping tool, such as the

PANDUIT

part number CT-100, may be used. The provided butt splices (

PANDUIT

part number

BSV14X) support 14-16 AWG solid or stranded wire.

WARNING:

The power supply connections are polarized.

The

DPoE

™ Power Panel will not function if power is wired improperly. For

Maximum power the overall length of the wire between the power supply and the

DPoE

™ Power Panel must not exceed 35 feet.

NOTE:

The included power harness has two wires for the A-feed power only (pins 1 & 2).
The

DPoE

™ Power Patch Panel supports an optional redundant B-feed power

option, but the terminals and wire leads are not attached to the power harness.

Contact

PANDUIT

Technical Support for more information about connecting the

redundant B-Feed Power.

14. Lightly tug on the butt spliced connections to verify that the butt splices are secure.

NOTE:

Proper fuses need to be equipped when powering

DPoE

™ devices. (Refer to

installation sheet PN385 for appropriate

DPoE

™ Power System chassis fuse

selection.

DPoE™
European (EMC)
Warning:

Product is not intended for use in a residential environment. Use of this product in
residential areas may cause electromagnetic interference.

Содержание DPOE12U1XY




































































Результаты поиска

Содержание DPOE12U1XY

Отзывы:

Похожие инструкции для DPOE12U1XY

Бренды по названию

Популярные бренды

Panduit DPOE12U1XY, Руководство пользователя

Результаты поиска

Содержание DPOE12U1XY

Отзывы:

Похожие инструкции для DPOE12U1XY

Бренды по названию

Популярные бренды