AT-OME-MS42
58
Configuration and Management Interfaces
Display Warm-Up Timer
Sets the projector lamp warm-up timer, in seconds. During the warm-up interval, the AT-OME-MS42 will not start
the auto power-off timer. This value specifies the time interval that must elapse, after the display control “on”
command is sent, before the display “power off” command can be sent. This feature is used to prevent a “power
off” command from being sent while the lamps are warming up. Available values are 10 seconds to 300 seconds.
The default value is 10 seconds.
Control Type
Sets the control protocol for the connected display. Click this drop-down to select the control type. Available
settings are
CEC
,
IP
, and
RS-232
. By default, CEC is selected for control of the display. IP and RS-232 can also
be selected. When IP or RS-232 are selected, more fields are available. Refer to
Solution Setup and Configuration
for more information.
