Panduit Atlona AT-OME-MS42, Руководство пользователя

Страница: 54 / 86

AT-OME-MS42 54
Configuration and Management Interfaces
The A/V Settings page is divided into three sections: Video , Audio , and HDCP . The Video section provides
controls for switching modes and input selection. The Audio section provides options to control the output audio
volume and de-embedding. The HDCP section controls whether or not HDCP content is allowed to pass.
Input Selection
Click this drop-down list to manually select the desired input.
Switching Mode
Click this drop-down list to manually select the switching mode. Refer to Switching Modes (page 18) for more
information.
Input Description
USBC Sets USBC as the active input.
DisplayPort Sets DP IN as the active input.
HDMI3 Sets HDMI IN 4 as the active input.
HDMI4 Sets HDMI IN 4 as the active input.
A/V Settings Page
Modes Description
Mirrored This is the default switching mode. Once video is detected on any of the
input ports, the output signal will be displayed on both the HDMI OUT and
HDBaseT OUT ports.
Matrix Mode This mode allows the AT-OME-MS42 to independently switch between any
input to any output.
Matrix Mode w/ Static Route Use this mode when integrating the AT-OME-MS42 with a video conference
system.