manualshive.com logo in svg

Panduit Atlona AT-HDVS-200-TX, Руководство пользователя, Страница: 28 / 44

Поделиться
Скачать
Panduit Atlona AT-HDVS-200-TX Скачать руководство пользователя страница 28

AT-HDVS-200-TX / AT-HDVS-200-TX-PSK

28

The Web GUI

EDID page

Perfer Timing (HDMI)

 

Click this drop-down list to select the preferred timing for the HDMI signal.

Prefer Timing (VGA)

 

Click this drop-down list to select the preferred timing for the VGA signal.

Input1 HDCP / Input2 HDCP

 

Provides control over the transmission of HDCP content for the 

HDMI IN 1

 and 

HDMI IN 2

 ports.  The following 

options are available:

•  Compliant 

- Forces detection of HDCP-compliant sink devices.  If the sink device is not HDCP-compliant, then 

no content will be transmitted.

•  Noncompliant 

- Suppresses detection of HDCP-compliant sink devices, allowing non-HDCP content to be 

transmitted.

•  Auto 

- Automatically detects the presence of HDCP-compliant sink devices.  If an HDCP-compliant display is 

detected, then HDCP content will be sent.  Otherwise, non-HDCP content will be sent.

NOTE:  

The HDCP control feature does 

not

 provide decryption of HDCP content to non-HDCP sink 

devices. 

Содержание Atlona AT-HDVS-200-TX













































Отзывы:

Нет отзывов