AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
14
Basic Operation
Defining the Front-Panel Buttons
The
DISPLAY
and
VOL (up/dn)
buttons, on the front panel, are user-defined. The factory-default setting of these
buttons have no function. For example, pressing the
DISPLAY
button, will toggle the backlit LED on or off.
This section covers how to assign a button to a function to control the display using CEC, RS-232, or IP protocols.
1.
Login to the web GUI. Refer to
Introduction to the Web GUI (page 16)
for more information, if necessary.
2. Click
Display
in the menu bar to access the Display page.
3. Scroll down to the
RS-232/IP commands
section. The AT-HDVS-200-TX provides the following types of display
control.
The AT-HDVS-200-TX provides the following types of display control.
* Note that a button can only be defined for one function at a time. For example, if the
DISPLAY
button is already
defined to turn-on or turn-off the display, this button cannot be used to mute the volume of the display device.
Command
Description
Button Used
ON
Power-on the display device
DISPLAY
OFF
Power-off the display device
DISPLAY
Increase the output volume of the display
VOL UP
Volume-
Decrease the output volume of the display
VOL DN
Mute
Mutes the audio output of the display
DISPLAY or VOL buttons