Panduit Atlona AT-HDR-SW-52ED Скачать руководство пользователя

Страница: 67 / 81

AT-HDR-SW-52ED

Configuration and Management Interfaces

EDID page

EDID

Description

Connected Display

Uses the downstream EDID of the connected display

ATL 4K60 MCH

3840 x 2160 (UHD) with multichannel audio support

ATL 4K60 PCM MCH

3840 x 2160 (UHD) with PCM multichannel audio support

ATL 1080P MCH

1920 x 1080p with multichannel audio support

ATL 1080P 2CH

1920 x 1080p with two-channel audio support

ATL 1080P DD

1920 x 1080p with Dolby

™

Digital audio support

ATL 1080P DVI

1920 x 1080p for DVI displays

ATL 720P DD

1280 x 720p with Dolby

™

Digital audio support

ATL 720P 2CH

1280 x 720p with two-channel audio support

EDID Settings

Click these drop-down lists to select the desired EDID to be used for each input. The following EDID presets are

available. When selecting an EDID, make sure that the display/sink device is capable of supporting the resolution/

timing. If the sink device is not able to support a feature, then the source will not be displayed. Selecting the

Connected Display

EDID will provide the most compatible settings for most displays. In addition, eight memory

locations are available for storing captured EDID data. If an EDID is stored in a memory location, it will also be added

to the list available EDID selections.

EDID Saved

The AT-HDR-SW-52ED provides eight memory locations used for storing captured EDID data. Click these drop-

down lists to select the desired output and press Save to store the EDID. Press the Delete button to erase the EDID

data. Refer to

EDID Management (page 44)

for more information.

Содержание Atlona AT-HDR-SW-52ED


















































































Результаты поиска

Содержание Atlona AT-HDR-SW-52ED

Отзывы:

Похожие инструкции для Atlona AT-HDR-SW-52ED

Бренды по названию

Популярные бренды

Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Результаты поиска

Содержание Atlona AT-HDR-SW-52ED

Отзывы:

Похожие инструкции для Atlona AT-HDR-SW-52ED

Бренды по названию

Популярные бренды