Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 22 / 81

AT-HDR-SW-52ED 22
Device Operation
Scaler Pass-Through
Click this toggle switch to enable or disable the scaler pass-through feature. When set to the
ON
position,
4K content will be down-scaled to 1080p when the output device detects a 1080p display on the output. When set
to the
OFF
position, the output resolution / timing will be the same as the input source. The default setting is
OFF
.
Refer to Notes on Scaling (page 23) for more information.
1. Log in to the web server.
2. Click A/V Settings in the menu bar.
3. Click the HDMI Output 1 and/or HDBT Output 2 toggle switch to the
ON
position.
4. The following message box will be displayed
if either toggle switch is enabled. Click OK to
dismiss the message box.
5. Click the toggle switch again, to return the
toggle switch to the OFF (default) position.
IMPORTANT: The scaler will only downscale the image resolution and does not support
frame rate scaling/conversion such as 60 Hz to 30 Hz. The frame rate of the source must be
supported by the display device.